A16-1 REVISED NOVEMBER, 2014 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. SOSMETAL PRODUCTS INC. FASTENERS & HARDWARE A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 MOST USED METRIC FASTENERS & FACTS l DIN 931 & 933 (Coarse Thread) l DIN 960 & 961 (Fine & Extra Fine Thread) l Medium Carbon Steel Grade 8.8 l Medium Carbon Alloy Steel Grade 10.9 l DIN 934 (Coarse, Fine & Extra Fine Thread) l Standard Steel Class 8 (Grade 8.8) l Hardened Steel Class 10 (Grade 10.9) l DIN 125 Flat l DIN 127 Split Lock l DIN 137 Spring Lock l Standard Steel Class 8 (Grade 8.8) l Hardened Steel Class 10 (Grade 10.9) 4 .70 36 3.30 5 .80 32 4.20 6 1.00 25 6.00 7 1.00 25 6.00 8 1.25 20 6.75 10 1.50 17 8.50 12 1.75 14.5 10.25 14 2.00 12.5 12.00 16 2.00 12.5 14.00 20 2.50 10.5 17.50 COARSE THREAD DIA. PITCH APPROX. THREADS RECOMMENDED MM MM PER INCH (AMERICAN) DRILLS (MM) - - - - - - - - - - - - 1.00 25 7.00 1.25 20 8.75 1.50 17 10.50 1.50 17 12.50 1.50 20 15.00 1.50 17 18.50 FINE THREAD PITCH APPROX. THREADS RECOMMENDED MM PER INCH (AMERICAN) DRILLS (MM) - - - - - - - - - - - - - - - 1.00 25 9.00 1.25 20 10.75 1.25 20 12.75 1.25 20 15.25 - - - EXTRA FINE THREAD PITCH APPROX. THREADS RECOMMENDED MM PER INCH (AMERICAN) DRILLS (MM) 7mm - 8mm - 10mm - 11mm - 13mm 12mm 17mm 14mm 19mm 17mm 22mm - 24mm - 30mm - WRENCH STD UND • Pitch is the distance measured between two threads • All metrics comply to D.I.N. and International Standards HEX HEAD CAP SCREWS HEX NUTS WASHERS METRIC FACTS TENSILE STRENGTH MATERIAL HEAD PLATING ILLUSTRATION Medium Standard Lusterplated 170,000 PSI Carbon alloy To resist rust Steel And corrosion Medium Standard Lusterplated 128,000 PSI Carbon To resist rust Steel And corrosion “MOST USED” METRIC FASTENERS Part No. 501465 Over 2700 pieces • 72 items 12020 (18) drawer steel cabinet Class 8.8 Hex Head Cap Screws 20 standard thread sizes from 5 x 16mm through 12 x 60mm. Pan Head Machine Screws 16 standard thread sizes from 3 x 6mm through 6 x 30mm. Flat Head Machine Screws 15 sizes in 5 diameters from 3 x 6mm through 6 x 30mm. Class 8 Hex Nuts, Flat and Lock Washers 7 standard thread sizes from 3 to 12mm with matching washers “MOST USED” FINE THREAD METRIC CAP SCREWS AND NUTS for Japanese cars Part No. 501479 Over 335 pieces • 27 items 12065 (6) drawer steel cabinet Class 8.8 Hex Head Cap Screws DIN 960 22 different caps screws, with standard head sizes, 8 x 16mm to 12 x 50mm. Class 8.8 Hex Nuts 5 different nuts; 8mm-1.00, 10mm-1.00, 10mm-1.50, 12mm-1.25, 12mm-1.50 pitch sizes. Combine with Assortment Part No. 501465 for complete automotive metric coverage. Cabinets match exactly.
RkJQdWJsaXNoZXIy MzE1MDc=