A19-10 REVISED FEBRUARY, 2021 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. RIVETS FASTENERS & HARDWARE SOSMETAL PRODUCTS INC. A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 SOLID ALUMINUM RIVETS* • Solid aluminum rivets are inserted into punched or predrilled holes and are used in structural applications. • They are extremely strong, permanent fasteners that join different workpieces together such as aircraft panels. • Aluminum has a high strength-to-weight ratio and is wear resistant, nonmagnetic and conductive. • It is easier to form and machine than steel and is naturally noncorrosive. SOFT (1100-F) Soft aluminum rivets have no head markings HARD (2117T4) Hard aluminum rivets can be identified by a small “dimple” in the crown of the head of the rivet ALUMINUM RIVETS – STANDARD BRAZIER HEAD Full brazier head design gives these rivets a larger bearing surface under the head; resulting in greater resistance to pull through. ALLOY 1100F ALLOY 2117T4 APPROX. PCS. PART NUMBER PART NUMBER NOM. DIA. LENGTH HEAD DIA. HEAD HEIGHT HEAD RADIUS PER POUND 701-101 701-112 .187 (3/16) 1/4 .467 .094 .339 640 701-102 701-113 .187 (3/16) 5/16 .467 .094 .339 576 701-103 701-114 .187 (3/16) 3/8 .467 .094 .339 523 701-104 701-115 .187 (3/16) 7/16 .467 .094 .339 480 701-105 701-116 .187 (3/16) 1/2 .467 .094 .339 443 701-105X 701-116X .187 (3/16) 9/16 .467 .094 .339 411 701-106 701-117 .187 (3/16) 5/8 .467 .094 .339 384 701-107 701-118 .187 (3/16) 3/4 .467 .094 .339 338 701-108 701-119 .187 (3/16) 7/8 .467 .094 .339 303 701-109 701-120 .187 (3/16) 1 .467 .094 .339 274 704-101 704-112 .250 (1/4) 1/4 .625 .125 .454 305 704-102 704-113 .250 (1/4) 5/16 .625 .125 .454 279 704-103 704-114 .250 (1/4) 3/8 .625 .125 .454 257 704-104 704-115 .250 (1/4) 7/16 .625 .125 .454 238 704-105 704-116 .250 (1/4) 1/2 .625 .125 .454 222 704-105X 704-116X .250 (1/4) 9/16 .625 .125 .454 207 704-106 704-117 .250 (1/4) 5/8 .625 .125 .454 195 704-107 704-118 .250 (1/4) 3/4 .625 .125 .454 174 704-108 704-119 .250 (1/4) 7/8 .625 .125 .454 157 704-109 704-120 .250 (1/4) 1 .625 .125 .454 143 PACKAGED 1 POUND PER BOX. NOTE: Rivets made with the softer alloy (1100F) are marked with a “2” on the bottom. Hard alloy (2117T4) rivets have a dimple on their head. Approximate proportions: A = 2.50 x D, H = 0.50 x D, R = 1.8125 x D NOTE: Not responsible for errors in data tables. Please check with our sales department to confirm specs. ALUMINUM RIVETS – MODIFIED BRAZIER HEAD Modified brazier head gives these rivets a low profile head design. ALLOY 1100F ALLOY 2117T4 APPROX. PCS. PART NUMBER PART NUMBER NOM. DIA. LENGTH HEAD DIA. HEAD HEIGHT HEAD RADIUS PER POUND 702-101 702-112 .187 (3/16) 1/4 .390 .078 .283 840 702-102 702-113 .187 (3/16) 5/16 .390 .078 .283 735 702-103 702-114 .187 (3/16) 3/8 .390 .078 .283 649 702-104 702-115 .187 (3/16) 7/16 .390 .078 .283 584 702-105 702-116 .187 (3/16) 1/2 .390 .078 .283 531 702-105X 702-116X .187 (3/16) 9/16 .390 .078 .283 485 702-106 702-117 .187 (3/16) 5/8 .390 .078 .283 448 702-107 702-118 .187 (3/16) 3/4 .390 .078 .283 387 702-108 702-119 .187 (3/16) 7/8 .390 .078 .283 341 702-109 702-120 .187 (3/16) 1 .390 .078 .283 305 705-101 705-112 .250 (1/4) 1/4 .468 .094 .339 478 705-102 705-113 .250 (1/4) 5/16 .468 .094 .339 417 705-103 705-114 .250 (1/4) 3/8 .468 .094 .339 369 705-104 705-115 .250 (1/4) 7/16 .468 .094 .339 331 705-105 705-116 .250 (1/4) 1/2 .468 .094 .339 300 705-105X 705-116X .250 (1/4) 9/16 .468 .094 .339 274 705-106 705-117 .250 (1/4) 5/8 .468 .094 .339 253 705-107 705-118 .250 (1/4) 3/4 .468 .094 .339 318 705-108 705-119 .250 (1/4) 7/8 .468 .094 .339 192 705-109 705-120 .250 (1/4) 1 .468 .094 .339 172 PACKAGED 1 POUND PER BOX. NOTE: Rivets made with the softer alloy (1100F) are marked with a “2” on the bottom. Hard alloy (2117T4) rivets have a dimple on their head. Approximate proportions: A = 1.94 x D, H = 0.33 x D NOTE: Not responsible for errors in data tables. Please check with our sales department to confirm specs. * SELECT SIZES NOW AVAILABLE IN STAINLESS STEEL.
RkJQdWJsaXNoZXIy MzE1MDc=