Sosmetal Products, Inc. - 2023 Product Catalog

A19-11 REVISED FEBRUARY, 2021 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. RIVETS SOSMETAL PRODUCTS INC. FASTENERS & HARDWARE A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 TAP-IT® HAMMER DRIVE NYLON FASTENER • Tap-It® hammer drive concrete anchors are tamperproof anchors used in wood, plastic, metal, concrete, fiberglass, block, brick and stone. • They have an anchor body and a steel pin. The pin is hammered flush to the anchor head, which then expands the anchor body. • Body (shell) material is nylon copolymer type 6 resin. • Drive pins (steel) C1008. • Zinc plated to ASTM A-164 and clear chromate dipped. • Heat treated. UNI-TAP® NYLON THERMAL NON-CONDUCTIVE FASTENER The Lowest Thermal Conductive Fastener Today... For reefers, Uni-Tap’s non-conductive nylon confers a unique, major advantage over conventional metal fasteners (which draw severe winter cold into a trailer interior, causing condensation and icing) or those with a nylon pin (which are considerably more expensive as well as being difficult to drive). Uni-Tap’sother features - strength, ease of installation and low cost - make it equally welcome for use in dry vans. Exceptional Strength! Uni-Tap® is made of tough Dupont nylon. This allows for a high sheer and tensile strength. It has the impact resistance to take hammer drive installation and the strength to hold firmly in place. • Withstands temperatures to -60° F. • 100% nylon, FDA approved. • Tamper-resistant, vibration resistant. • Non-corrosive. • Can be used in the following materials: plywood, plastic, studs, plexiglas, concrete, sanitary wall systems, block, metal, brick and foam insulation. TRUSS HEAD GRIP RANGE PART NUMBER DIA. LENGTH MIN. MAX. 706-102 3/16 3/4 1/16 1/4 706-104 3/16 1 1/4 5/8 706-118 1/4 3/4 3/16 5/8 706-120 1/4 1 3/16 7/8 706-122 1/4 1-1/2 3/8 1-1/4 706-124 1/4 2 7/8 1-3/4 706-128 1/4 3 1-3/4 2-1/2 GRIP RANGE PART NUMBER DIA. LENGTH MIN. MAX. 706-150 1/4 1 3/16 1/2 706-152 1/4 1-5/8 3/8 1-1/8 706-154 1/4 2-5/8 7/8 1-5/8

RkJQdWJsaXNoZXIy MzE1MDc=