C11 C12 C13 C14 C15 LUBRICANTS SOSMETAL PRODUCTS INC. CHEMICALS C10-3 REVISED JULY, 2022 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. C10 C16 C17 C18 C19 C20 C21 MOLY DRY FILM LUBRICANT Part No. 211306 (12) 13 oz. net wt. (368g) Excellent for casting molds, oven hardware, cams, followers, rollers, chain cable, open gears, threaded fasteners, slides, locks, latches, pins, bearings, press fits, and as a break-in lube. • Lubricates in very high temperatures, to 750°F. • Dry molybdenum disulfide fills metal pores, “valleys”, scratches & other recesses in the metal surface to create tight adhesion. • Contains no oil, grease, or graphite. • Load capacity to 140,000 psi. • Will not attract dust or dirt. MOLY GEAR AND CHAIN LUBE Part No. 13129 (12) 14 oz. net wt. (396g) GEAR-KOTE - Heavy Load Lubricant Part No. 211460 (12) 15 oz. net wt. (425g) RED GREASE High temp, extreme pressure, red grease in an aerosol. Part No. 211313 (12) 11 oz. net wt. (312g) Sprays like a liquid, penetrates deep & sets up to a full-bodied heavy-duty grease in seconds. • Holds together under extreme pressures and high shock loads. Superior quality petroleum base, lithium complex grease. • Adheres to hot surfaces - will not breakdown, harden or separate under heat, even up to +450°F. INDUSTRIAL FOOD GRADE CHAIN LUBE Blend of synthetic lubricants and mineral oil to keep roller drive and conveyor chains lubricated. Penetrates, lubricates and protects moving parts by reducing friction and wear. • NSF H1 rated for incidental food contact. • Transparent Water-White Liquid appearance with no odor. • Working temperature 8 to 325°F. • >370°F flash point. • Non-drying film. Part No. 211308 (12) CRC No. 03055 12 oz. net wt. (340g) CRC® POWER LUBE Multi-purpose lubricant. Part No. 211571 (12) CRC No. 05005 9 oz. net wt. (255g) • Plastic safe...will not damage modern plastics like ABS, NORYL and LEXAN that are found in cars, work shops, plants, offices and farms. • Odor free...will not offend customers when sprayed inside vehicles. • Contains no CFC’s. • Spray in any position valve. BLASTER GDL GARAGE DOOR LUBE Part No. 211518 (12) 9.3 oz. net wt. spray can • Use on commercial garage doors, fleet & tractor trailer door service, overhead doors, hinges, cables, chains, springs, bearings, bushings, door tracks, worm gears. • Leaves a dry, tack-free film. Non-staining long lasting formula, will not evaporate. • Prevents rust, corrosion, squeaking, & sticking problems. Lubricates & protects to extend the life of equipment. • NO ozone depleting chemicals. Patented MSDS(L)™ Label! TOP TEN SELLER Powerful garage door lube - high performance formula. • 100% waterproof. • Outperforms all lithium greases. • Passes 1000 hours ASTM D-117 5% salt spray test. • Will not wash out or attract dirt and grime. Outperforms typical HD greases & lubricants. Prevents wear, fretting and corrosion on heavy load gears & transportation equipment. • High moly content provides outstanding EP (extreme pressure) lubrication. • Extreme temperature protection from -40F to +700°F. • NEW, “Thin Film” characteristics require less lubricant. • 50% more Moly (molybdenum disulfide). • Specially formulated with New Hi-EP Grease. • High degree of “tack” creates excellent adhesion as well as superior “film rupture” healing characteristics. • Adheres w/o leaving the metal bare after release. • Highly water resistant. Prevents rust and oxidation. • Test Results 5% salt spray booth ASTM D-117 Passes 3000+ hours & max load of 4500 lbs. - no failure Superior lubrication - anti wear properties. Falex load / wear test - ASTM D-3233 Torque reading 60. PREMIUM GARAGE DOOR LUBE • Advance, high-performance, corrosion-protecting lubricant generously fortified with silicone and PTFE for superior friction-reducing lubrication. • Foaming action penetrates deep to promote smooth operation for rollup doors, automatic garage door, drive chains and any exposed metal surfaces subject to severe loading. • 200°F flash point. • Non-drying film. Part No. 211640 12 CRC No. 05032 10 oz. net wt. LIQUID WRENCH - LED TECHNOLOGY Part No. 211220 (12) 11 oz. net wt. (311g) Penetrant, lubricant & LED light in one. • Built-In LED Flashlight Technology lets you see in dark tight spaces for the life of the product. • Pro grade formula quickly penetrates rust, corrosion and grease & provides superior long lasting lubrication. • Switch from precision spray with straw or fan spray without straw. • Comfort grip and locking collar to prevent unintentional spraying. • Zero VOC. (PSS041618) CHAIN AND CABLE FLUID Part No. 711760 6 11 oz. net wt. (312g) Thin film penetrating lubricant. • Lubricates, penetrates and cleans. • Maintains a moist lasting film. • Reduces friction. • Prevents rust and corrosion • Does not pick up dust or dirt.
RkJQdWJsaXNoZXIy MzE1MDc=