C15 C14 C13 C12 C11 LUBRICANTS CHEMICALS SOSMETAL PRODUCTS INC. C10-8 REVISED FEBRUARY, 2019 C10 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. C20 C19 C18 C17 C16 C21 • For general o-ring/valve lubrication. • A heavy translucent white coating paste with a high dielectric strength to block out moisture & oxidation. • Used on sanitary, butterfly, gate, ball, automated valves and anywhere rubber or plastic o-rings are used for pump packing or vacuum or pressure systems. • Temp. range -40°F to 400°F. • Authorization: NSF5&61 FDA21 CFR175 300 Part No. 711745 5.3 oz. net wt. tube VALVE / O-RING LUBE and SEAL FREEWHEEL LUBRICANT COST LESS TO USE THAN GREASE “Thin Film” laminated film lubricant. Outperforms all conventional 5th wheel grease. • Will not wash out, especially resistant to salt water, and will not attract dirt or gravel. • Resists squeeze-out under load, reduces wear on 5th wheels. • Penetrates and frees rusted sliders. • Creates a cleaner, safer, easier steering rig, makes lane switching and turns smooth. Part No. 211461 (12) 15 oz. net wt. (425g) NO SMOKE TWO STROKE PART FLUIDDESCRIPTION NUMBER OZ QTY 211212 2.6. mix in 1 gal. of gas 24 211213 6.4 mix in 2.5 gal. of gas 24 SNOW PLOW OIL Part No. 711797 32 oz. net wt. • Improved formula hydraulic fluid. • Blue non foaming anti wear formula with anti-freeze additive protects to extreme conditions down to (-50°F). Replaces: Meyers® 15134 Western49311 Fisher® 28531, Sno-Way® 96005029 • Low deposit formations. • Anti-corrosion performance. • Superior performance with unleaded gas. • Incredible anti-seizure protection. • Remarkably less exhaust port clogging. • Significantly less piston scuffing. • Reduced down time & increases engine life. BRAKE CYLINDER ASSEMBLY FLUID For reassembly of master cylinders, disc and drum brake cylinders & other hydraulic parts. • Eases rebuilding, assembly and overhauling of hydraulic parts. • Does not absorb moisture. Prevents rusting of cylinder walls and internal parts during storage. • Apply to all surfaces; pistons, boots, seals, springs, rubber caps, shims and cylinder walls. Part No. 211412 8 fluid oz. CAUTION: Do not use as a brake fluid substitute or additive. • Premium grade, all purpose, turbine grade lubricating oil. • Use on rotating and reciprocating equipment, bearings, motors, and slides. • Flexible zoom spout extends 7” for difficult to reach areas. Part No. 211515 4 fl. oz. THE ORIGINAL ZOOM® SPOUT OILER 3-IN-ONEMULTI-PURPOSE OIL • Specially formulated lubricating oils. • Lubricates, cleans & prevents rust. • Easy-to-use drip spout provides exact application, no overspray or splatter. 6” Telescoping Spout, Part No. 211545 4 fl. oz. 6” telescoping spout (PSS112013) LUBE TUBE MULTI-PURPOSE LUBRICANT • Biodegradable, non-toxic & non-staining. • Extreme pressure lubricant - prevents the build-up of frictional heat. • Designed to be applied to band saws and other cutting tools - improves overall tool life and productivity when sawing, drilling, milling, grinding, threading and tapping. Part No. 211512 14.5 oz. (411.1 grams) Can be used on ferrous and non-ferrous metals, aluminum gates and risers, plates and extrusions. (PSS111817) WD-40® SMART STRAW Part No. 211556 (12) WD No. 110078 11 oz. net wt. (311g) The can that has a 1,000 uses almost anywhere now has a flip up straw connected. • Non-conductive and can be used to dry out electrical equipment. • Loosens rusted parts & frees sticky mechanisms. • Never lose the straw again. • Stops squeaks. • Cleans & protects. • Drives out moisture. SQUEAL MEDIC Part No. 211297 (12) 11.25 oz. net wt. (318g) • Use on every brake job. • Use on disc, drum, ABS brakes & rotors. • Delivers excellent noise suppression. • Fills voids caused by harmonic vibrations. • Will not effect or damage ABS sensors or rubber components. • Prevent oxidation. • No drying time. (PSS122818)
RkJQdWJsaXNoZXIy MzE1MDc=