CHEMICALS SOSMETAL PRODUCTS INC. C15-4 REVISED JULY, 2015 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. C15 C14 C13 C12 C11 C10 C20 C19 C18 C17 C16 C21 PRODUCT SPECIFICATIONS & APPLICATIONS Appearance: Clear Colorless Liquid Odor: Solvent odor pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0°F - >400°F Vapor density: Above 1.0 Evaporation Rate: Residual Film will not evaporate Specific Gravity: (water=1) Below 0.83 ∀ .05 Solubility in Water: Negligible Boiling Point: > 400°F Vapor density: No data Evaporation Rate: Will not evaporate Specific Gravity: (Water=1) Approximately .75 ∀.05 Solubility in Water: Nil Part No. NPL103 • ONESHOT with Teflon® • Synthetic Penetrating Gel-Lube • Part No. NPL111 • CUTRIGHT • Low Friction Cutting Foam• Part No. NPL115 • Gripper • Belt Conditioner • Products Specifications Ingedients: Hydrotreated Petroleum Naphtha, Liquified Petroleum Gas, Chlorinated Paraffin, Lard Oil, Linseed Oil Appearance: Straw Colored Foamy Liquid Odor: Mild Petroleum Odor pH: N/A Storage: Below 120°F (49°C) But Above Freezing APPLICATIONS AND USES Excellent when tapping, reaming, drilling, threading. Not for use on aluminum. DIRECTIONS FOR USE Shake well before using. Spray directly on area to be worked and cutting tool. Sprays best at room temperature, 70°F and above. Use extension nozzle to pinpoint spray and eliminate waste. FEATURES AND BENEFITS • Foaming action stays on cutting area - Foam runs up drills keeping them cool while continuing to feed cutting area. Eliminates dripping, messy oil and cleanup. • Dramatically cuts heat created by drilling, reaming & tapping. • Increases tool life up to10 times longer than ordinary oils. • Reduces thermal expansion creating more accurate hole sizes. • Not recommended for aluminum. Products Specifications Ingedients: Heptane,Polyether Polyol, Liquefied Petroleum Gas APPLICATIONS AND USES • Dollies • Cams • Piano hinges • Locks • Conveyors • Wheels • Slides • Open gears • Chains • Rollers • Slide bearings • Cables DIRECTIONS FOR USE Shake well before using. Saturate area to be lubricated. Allow to set-up as gel. Use extension tube for hard-to-reach areas. FEATURES AND BENEFITS • Penetrates • Petroleum free • E.P. rated • Lubricates • Bonds tenaciously • Protects & preserves • Colorless, stainless and dustless • Withstands temperatures from - 30° to 530° F • Resists water Appearance: Straw Colored Liquid Odor: Solvent-like pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0°F — >156°F Products Specifications Ingedients: Heptane, Acetone, Liquefied Petroleum Gas, Oxidized Herring Oil, Polymerized Rosin APPLICATIONS AND USES Air compressors Automotive Aelts Dryers Engines Furnace blowers Garden tractors Powertools Refrigerators Fans Water Pumps Conveyors DIRECTIONS FOR USE Spray in well ventilated area. Area to be treated should be free of foreign matter. Spray product back and fourth across the inner working surface of belt from a distance of 10-12 inches. Occasional repeat applications will add life and increase efficiency. FEATURES AND BENEFITS • Deep penetration to the innermost fibers. Renews and revitalizes all automotive and industrial V-belts. • Prevents dry rot, reduces stretching and wear. • Removes and prevents glazing and hardening. • Leaves no gummy deposit to attract dirt and cause wear. Appearance: Clear Amber Odor: Solvent Odor pH: N/A Storage: Below 120°F (49°C) Boiling Point: >250°F Part No. NPL119 • INVADER• Non-Flammable Rust Penetrant • Products Specifications Ingedients: Perchloroethylene, Hydrotreated Light Naphthenic Distillate, Hydrotreated Heavy Naphthenic Distillate, Proprietary Rust Preventive, Coal Oil, Carbon Dioxide APPLICATIONS AND USES • Nuts & bolts • Screws • Cables • Chains • Wheels • Casters • Linkages • Studs • Tools • Pillow Blocks • Clamps • Exhaust Parts • Locks • Padlocks • Hinges • Pulleys DIRECTIONS FOR USE Safe on most surfaces. Avoid plastics, solvent sensitive materials or painted surfaces. If in doubt, test on an inconspicuous area. FEATURES AND BENEFITS • Non-flammable formula - safe for use on energized equipment. • Lubricates all moving parts. • Penetrates through rust and corrosion. • Disperses moisture; dries wires and contacts. • Prevents corrosion; seals out moisture. • Cleans and degreases parts and assemblies. Vapor density: Above 1.0 Evaporation Rate: Medium evaporation. Residual film will not evaporate. Specific Gravity: (Water=1) Approximately 1.51 " .05 Solubility in Water: Insoluble Vapor density: Above 1.0 Evaporation Rate: Fast evaporating Specific Gravity: (Water=1) Approximately .68 ∀.05 Solubility in Water: Negligible
RkJQdWJsaXNoZXIy MzE1MDc=