SOSMETAL PRODUCTS INC. CHEMICALS C15-5 REVISED JULY, 2015 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. C11 C12 C13 C14 C15 C10 C16 C17 C18 C19 C20 C21 PRODUCT SPECIFICATIONS & APPLICATIONS Appearance: Black Odor: Petroleum/Solvent/ Oil Like Odor pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0°F — +400°F Part No. NPL123 • FORCE• Penetrating Chain and Cable Lubricant • Products Specifications Ingedients: Lithium Complex Grease, Liquefied Petroleum Gas, Hexane, Acetone, Molybdenum Disulfide, Polyisobutylene DIRECTIONS FOR USE Shake can well to disperse Moly. Spray point to be lubricated and repeat as needed. For best performance can should be at room temperature (70°F) when used. FEATURES AND BENEFITS • 50% more Moly (molybdenum disulfide) for superior lubrication. • Specially formulated with New Hi-EP Grease. • High degree of “tack” creates excellent adhesion as well as superior “film rupture” healing characteristics. • Adheres to the gear, chain or cable without leaving the metal bare after each release. • Highly water resistant. Prevents rust and oxidation. • Test Results Superior Corrosion - rust protection: Superior lubrication - anti wear properties: 5% salt spray booth ASTM D-117 Falex load & wear test ASTM D-3233 Passes 3000+ hours - no failure. Passes max. load of 4500 lbs. - no failure. Torque reading 60. Appearance: Black Odor: Solvent pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0 TO 156°F Vapor density: Heavier than air Evaporation Rate: Slower than Ether Specific Gravity: (Water=1) 0.76 ± .0.05 Solubility in Water: Nil Part No. NPL127 • CLING-ON• Extreme Pressure Open Gear Lubricant • Products Specifications Ingedients: Petroleum, Paraffin Oil, Hexane, Isohexane, Isomers, Propane, Butane APPLICATIONS AND USES • Open Or Exposed Chains, Wire, Rope Of Cables On Heavy Loads And Extreme Pressure • Snow Removal Equipment • Marine And Dockside Equipment • Elevators • Cranes • Drag lines DIRECTIONS FOR USE Shake can well before using. Spray liberally in short bursts from 12 to 15 inches. Repeat as needed. FEATURES AND BENEFITS The tacky adhesiveness of this product continuously recoats and lubricates all gear surfaces. Extremely effective when used underwater. Forms a film that resists rust and corrosion. Increases life of all gears. Extreme pressure capacity minimizes squeeze-out Appearance: Copper Colored Odor: Slight Petroleum Odor pH: N/A Storage: Below 120°F (49°C) Boiling Point: Below 120°F (49°C) Vapor density: Above 1.0 Part No. NPL131 • APOLLO• Extreme range Lubricant and Anit-Seize • Products Specifications Ingedients: Heptane, Liquefied Petroleum Gas, Acetone, Copper, Graphite APPLICATIONS AND USES For easy removal of spark plugs, cylinder head bolts, exhaust hardware, disc brake calipers, and all machinery and equipment fasteners. Use to protect metal parts under extreme pressures up to 15,000 p.s.i. and sustained temperatures up to 2200°F. DIRECTIONS FOR USE 1. Shake well before using. 2. Clean surface of all oil, grease, rust or other contaminates that might prevent a good seal. 3. Spray an even coat 6-12 inches from surface of parts to be assembled. FEATURES AND BENEFITS • Highly refined blend of aluminum, copper and graphite. • Contains no lead. • Assures easy disassembly. • Superior temperature range: -252°F to 2200°F. • Water and steam proof, non-flammable. • Excellent for long term corrosion protection. Vapor density: Above 1.0 Evaporation Rate: Residual film will not evaporate Specific Gravity: (Water=1) Approximately 0.76 ∀.05 Solubility in Water: Negligible Evaporation Rate: Residual film will not evaporate Specific Gravity: (Water=1) Approximately .78 ∀.05 Solubility in Water: Negligible Appearance: Dry Black Film Odor: Solvent pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0°F — >395°F <-18°F — >201°F Vapor density: Heavier than Air Evaporation Rate: Fast than Ether Specific Gravity: (Water=1) 0.73 Solubility in Water: N/A Part No. NPL134 • MIDNIGHT RIDER• Dry Moly Lubricant • Products Specifications Ingedients: 2-Propanol, Acetone, Butane, Propane, Ethyl, 3-Ethoxypropionate, Mineral Spirits, Molybdenum Disulfide APPLICATIONS AND USES Use on gears and chains, motors, bearings, boilers, engines, pump assemblies, conveyors, construction equipment, farm implement equipment. DIRECTIONS FOR USE Shake well before using. Spray 8-10 inches from surface. Spray a light even film. Wipe off excess with cloth. Repeat application, second coat gives additional protection. FEATURES AND BENEFITS • Provides excellent lubrication properties without attraction of dust or dirt. • Provides a smooth, frictionless surface for maximum operating efficiency. • Reduces metal wear and fatigue to extend equipment life. • Will not break down under high temperatures.
RkJQdWJsaXNoZXIy MzE1MDc=