CHEMICALS SOSMETAL PRODUCTS INC. C15-8 REVISED JULY, 2015 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. C15 C14 C13 C12 C11 C10 C20 C19 C18 C17 C16 C21 PRODUCT SPECIFICATIONS & APPLICATIONS Appearance: White Foam Odor: Mild pH: 10.0 + 0.5 Storage: Below 120°F (49°C) Boiling Point: <0°F - >213°F Vapor density: Heavier than air Evaporation Rate: Slower than Ether Specific Gravity: (water=1) 0.93 + 0.1 Solubility in Water: Emulsion Part No. NPL324 • GLISTEN• Foam Protectant • Products Specifications Ingedients: Deionized Water, Poly (dimethylsiloxane), Butane, Propane, Poly (oxyethylene) Decyl Ether APPLICATIONS AND USES Cleans under-the hood rubber products, hoses, air intake ducts, tires, bumpers, and trim. DIRECTIONS FOR USE Shake well before using. Spray at 8 inch distance from surface. For more gloss, use 2 applications. For less, wipe once with clean cloth. Whitewalls may require light rubbing with cloth or brush then respray over whitewall. FEATURES AND BENEFITS Self-cleaning foam cleans and shines all vinyl, rubber and synthetic surfaces. Product cures to a glossy protective shine in minutes, with no buffing. Leaves an extra long-lasting protective shine that repels dirt, asphalt, and grime. Product works best if original surface is cleaned first. Protects againstdiscoloration, oxidation and ozone deterioration. Buffing may help cleaning action. Appearance: Air Odor: None pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0°F - >14°F Vapor density: Heavier than air Evaporation Rate: Faster than Ether Specific Gravity: (water=1) 1.21 + 0.05 Solubility in Water: NA Part No. NPL330 • BLAST • Jet Air Duster • Products Specifications Ingedients: Tetrafluorethane APPLICATIONS AND USES For use on delicate optical photographic lenses, scientific equipment, timing devices, film, typewriters, TV’s computer printers and terminals, keyboards, computer disks, tuning devices, miniature assemblies, watches, radio and navigation equipment, audio/video cartridges, and cassettes. DIRECTIONS FOR USE Do not shake can during use. Always hold can upright - Do Not Exceed or Tilt more than 30°. For maximum efficiency, always use this product with snorkel tube provided. FEATURES AND BENEFITS Removes dust from delicate equipment. Clean, pure air. Moisture free. Removes dust, dirt, lint, and other airborne particles from sensitive and delicate equipment. Appearance: White Gel Odor: Solvent odor pH: 10.25 + 0.5 Storage: Below 120°F (49°C) Boiling Point: <0°F - >342°F Vapor density: Heavier than air Evaporation Rate: Slower than ether Specific Gravity: (water=1) 0.80 + 0.5 Solubility in Water: Emulsion Part No. NPL351 • RELEASE• Adhesive Remover • Products Specifications Ingedients: Toluene, Deionized Water, Propane, Diacetone Alcohol, Butane, 2-Propanol, Acetone APPLICATIONS AND USES RELEASE adhesive remover instantly penetrates and dissolves adhesives to remove: • Labels • Stickers • Decals • Old hardened adhesive residue Safe On Most Surfaces Including: • Glass • Metal • Wood • Plastics Caution: RELEASEmay soften some plastics and paints. Always pretest on an inconspicuous area to determine if it will harm the surface finish. DIRECTIONS FOR USE Apply RELEASEso that it completely covers and soaks into the label or sticker that is being removed. Allow several minutes while it soaks through label and softens adhesive layer, then peel off label. Any adhesive residue can be removed from the surface by spraying and wiping with a cloth. FEATURES AND BENEFITS Emulsifiable - wipe off with cloth or rinse off with water. Appearance: Clear Colorless Liquid Odor: Pleasant Sweet Odor pH: N/A Storage: Below 120°F (49°C) But Above Freezing Boiling Point: <0°F - >212°F Part No. NPL354 • DIAMOND• Glass Cleaner • Products Specifications Ingedients: Water, Isopropanol, Liquefied Petroleum Gas, Ammonium Hydroxide, Dipropylene Glycol Monobutyl Ether APPLICATIONS AND USES Cleans windows, mirrors, tile, porcelain, chrome and bath fixtures. Removes stubborn residues such as road film, oil, road salt, grease, paint overspray and bugs. Excellent for automotive, fleet, industrial and institutional uses. Removes paint overspray. Does not contain silicone. DIRECTIONS FOR USE Shake well before use. Hold can in an upright position while applying from a distance of 10-12 inches from surface. Direct spray toward the middle of the area to be cleaned. Allow several seconds for foam to penetrate filmed surface. Wipe with a clean paper towel or cloth. FEATURES AND BENEFITS • Cleans surfaces fast and easy through foaming action. • Just spray it on and wipe it off immediately for sparkling clean surfaces every time. • Leaves no sticky film to attract dirt and is non-staining. • Contains ammonia for effective grease cutting. • Cuts dirt and grime, removes smoke film. Vapor density: No data Evaporation Rate: Approximate of water Specific Gravity: (water=1) Approximately 1.0 ∀ .05 Solubility in Water: Soluble
RkJQdWJsaXNoZXIy MzE1MDc=