Sosmetal Products, Inc. - 2023 Product Catalog

SOSMETAL PRODUCTS INC. CHEMICALS C15-9 REVISED JULY, 2015 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. C11 C12 C13 C14 C15 C10 C16 C17 C18 C19 C20 C21 PRODUCT SPECIFICATIONS & APPLICATIONS Appearance: Clear Colorless Liquid Odor: Solvent odor pH: N/A Storage: Below 120°F (49°C) Boiling Point: >150°F Part No. NPL357 • BLITZ • Fast Drying Super Solvent • Products Specifications Ingedients: Heptane, Acetone, Isopropyl Alcohol, Toluene, Methyl Alcohol, Carbon Dioxide APPLICATIONS AND USES Air tools, mechanical brakes and clutches, chains and wire rope, motors, dies and molds, material handling equipment, switchgear, corroded machinery and parts, bearings, generators, and compressors. May be harmful to some plastics and paints. Test on small area before using. DIRECTIONS FOR USE Shake can well. Apply product liberally. Allow solvent to run off washing away the oil, grease and dirt. Repeat application for absolute cleaning. FEATURES AND BENEFITS BLITZ safely cleans, degreases and removes soil, oil, grease, and built-up grime fast. Also dries in seconds leaving no film or residue, so cleaned surfaces are ready for immediate painting or assembly. Vapor density: Above 1.0 Evaporation Rate: Fast evaporating Specific Gravity: (water=1) Approximately .68 ∀ .05 Solubility in Water: Negligible Appearance: White Gel Odor: Solvent odor pH: 10.25 + 0.5 Storage: Below 120°F (49°C) Boiling Point: <0°F - >342°F Vapor density: Heavier than air Evaporation Rate: Slower than ether Specific Gravity: (water=1) 0.80 + 0.5 Solubility in Water: Emulsion Part No. NPL363 • WIPEOUT • Vandal Mark Remover • Products Specifications Ingedients: Toluene, Deionized Water, Propane, Diacetone Alcohol, Butane, 2-Propanol, Acetone APPLICATIONS AND USES Suitable for use on brick, formica, steel, aluminum, glass, chrome, marble, porcelain, ceramics, etc. Effective on buildings, signs, bridges, buses, freight cars, restroom, and locker room facilities. DIRECTIONS FOR USE Shake well before using. Spray 8 to 12 inches from surface. Allow several minutes to penetrate - for stubborn marks, use a stiff brush to agitate before wiping or rinsing. Repeat above if necessary. FEATURES AND BENEFITS Emulsifiable - wipe off with cloth or rinse off with water. Removes pen inks, marker inks, printing inks, spray paints, adhesives, crayon, lipstick, tar, scuffs, etc. Appearance: Clear Colorless Liquid Odor: Citrus Odor pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0°F – >250°F Vapor density: Above 1.0 Evaporation Rate: Slow to medium Specific Gravity: (water=1) Approximately .92 ∀ .05 Solubility in Water: Soluble Part No. NPL366 • ORANGE AID• Fast Flushing Citrus Cleaner & Degreaser • Products Specifications Ingedients: Water, Ethylene, Glycol Monobutyl Ether, Liquefied Petroleum Gas, Isopropyl Alcohol, D’Limonene, Ammonia APPLICATIONS AND USES Engine degreaser, carpet and upholstery spot and stain remover, unclog drains and grease traps, clean grills, and ovens, removes decals, tar, asphalt, tire marks and printers ink. DIRECTIONS FOR USE Shake well before using. Spray directly on surface and allow product to soak in. Wipe clean (or hose off). Plastics should be immediately wiped clean. Avoid use on styrene. FEATURES AND BENEFITS • Contains D'Limonene - a safe, natural citrus based solvent. • Contains no acids, no caustics or corrosives. Non-carcinogenic. • Emulsifies in water. Totally biodegradable. • Versatile, all-purpose cleaner. Dilute for normal use, or use straight, for extra strength. • USDA accepted. Appearance: Clear Odor: Petroleum/Solvent odor pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0°F - >156°F Vapor density: Above 1.0 Evaporation Rate: Not established Specific Gravity: (water=1) Below 0.56 ∀ .05 Solubility in Water: Negligible Part No. NPL503 • SNOWAY• Triple Thick Silicone Gell • Products Specifications Ingedients: Hexane, Liquefied Petroleum Gas, Polydimethylsiloxane APPLICATIONS AND USES USE ON: Snowplows, Snowblowers, Backhoes, Front End Loaders and Snow Shovels. DIRECTIONS FOR USE Shake well. Hold can 8 to 10 inches from point of application. For proper application and optimum performance, product should not be stored in temperatures under 60º F. FEATURES AND BENEFITS • Can be used on all metallic and non-metallic surfaces. • Eliminates snow and ice build-up. • Clear, non-staining, odorless, moisture resistant.

RkJQdWJsaXNoZXIy MzE1MDc=