D10A-10 REVISED MAY, 2018 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. BONDED ABRASIVES TOOLS & SHOP SUPPLIES SOSMETAL PRODUCTS INC. D14 D13 D12 D11 D10A SIZE UNHUBBED “A” “B” “C” MAX GRAIN/ PART DIA. WIDTH BORE RPM GRIT USE NUMBER QTY 4 1/4 5/8 15,000 A24N Ferrous Metals, Fast Cut 811693 25 4-1/2 1/4 7/8 13,300 A24N Ferrous Metals, Fast Cut 811694 25 4-1/2 1/4 7/8 13,300 A24R Ferrous Metals, Long Life 811695 25 4-1/2 1/4 7/8 13,300 AL36N Aluminum, Brass, Copper 811696 25 5 1/4 7/8 12,200 A24N Ferrous Metals, Fast Cut 811711 25• 5 1/4 7/8 12,200 A24R Ferrous Metals, Long Life 811697 25 7 1/4 7/8 8,500 A24N Ferrous Metals, Fast Cut 811713 25• 7 1/4 7/8 8,500 AL36N Aluminum, Brass, Copper 811714 25• •NOT SOS LABEL THORgrinding wheels are formulated to deliver the highest possible productivity and performance, whether it is used for beveling, weld or edge grinding applications. • Special aluminum oxide grain. • Externally reinforced with fiberglass layers to provide ultimate safety. • Fast, burr-free cutting. • Specifically designed for use on right angle grinders. SIZE HEX HUB “A” “B” “C” MAX GRAIN/ PART DIA. WIDTH BORE RPM GRIT USE NUMBER QTY 4-1/2 1/4 5/8-11 13,300 A24N Ferrous Metals, Fast Cut 811705 25 4-1/2 1/4 5/8-11 13,300 A24R Ferrous Metals, Long Life 811706 25 4-1/2 1/4 5/8-11 13,300 AL36N Aluminum, Brass, Copper 811716 25• 7 1/4 5/8-11 8,500 A24R Ferrous Metals, Long Life 811707 25 7 1/4 5/8-11 8,500 AL36N Aluminum, Brass, Copper 811715 25• •NOT SOS LABEL • GRINDING APPLICATIONS • These wheels are for general purpose grinding where metal needs to be removed. Made in USA SIZE “A” “B” “C” MAX GRAIN/ PART DIA. WIDTH BORE RPM GRIT USE NUMBER QTY 4-1/2 1/8 7/8 13,300 A30R Ferrous Metals, Long Life 811717 25• 6 1/8 7/8 10,200 A30R Ferrous Metals, Long Life 811718 25• •NOT SOS LABEL • GRINDING/CUTTING APPLICATIONS • These wheels are specifically designed to do combination cutting and light grinding within the same application eliminating the need to change wheels or tools. Primarily used in the pipeline industry. TYPE 27 DEPRESSED CENTER GRINDING WHEELS PSSZT010512 DIAMOND TYPE 27/29 DEPRESSED CENTER GRINDING WHEELS Unique technology that allows a high concentration of diamonds to be solidly bonded to a steel surface for grinding metal. • Diamonds, the hardest natural material gets the job done quickly and efficiently. • Outperforms Others –last 50-60 times longer than standard grinding wheels. • Cost Efficient, fewer purchases over time. • Less Down Time – no need to have the operator changing wheels. • Promotes longer tool life – no abrasive debris and minimum dust. • Super Safe – eliminates breakage, cracking and failure. • Reduced Vibration, sparks and odors. • Not Effectedby exposure to water. • Use Onhigh and low carbon steel, ductile iron, rail track, cast iron, alloys, stainless steel, pipeline application and foundry castings. PART DIA. MAX NUMBER (INCHES) GRIT ARBOR RPM 815006 3” 36 1/4 Hub* 30000 815002 4-1/2” 24 5/8-11 Hub* 13300 815004 4-1/2” 36 5/8-11 Hub* 14000 815012 4-1/2” 40/50 5/8-11 Hub* 13300 * Removable hub for 7/8” arbor LONG LASTING – HIGH PERFORMANCE * Additional sizes are available on a special order basis. Call for information. Regular Abrasive Wheel Diamond PSS071917, PSS041118 DIAMOND CUT-OFF/GRINDING WHEELS Grinding, deburring, surface prep and cutting. • Lasts 20X’s longer than regular grinding wheels. • Cuts faster. • Low odor & debris. • Allows access in hard-to-reach areas. PART DIA. MAX NUMBER (INCHES) GRIT ARBOR RPM 815005 2” 36 1/4” attached 30000 PSS041118 5/8-11 REUSEABLE ADAPTER For Right Angle Grinders Fits both Type 27 & 1 Wheels with 7/8” Hole. Part No. 822000
RkJQdWJsaXNoZXIy MzE1MDc=