NON-WOVEN ABRASIVES D10A-13 REVISED MARCH, 2016 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. SOSMETAL PRODUCTS INC. TOOLS & SHOP SUPPLIES D10A D11 D12 D13 D14 Cleans all hard to reach gasket surfaces. GASKET CLEANER Part No. 214011 Use with a die grinder to quickly clean gasket surfaces on Dodge pickups, oil pans, water pumps and other inaccessible applications. The tool is equipped with a floating guide shaft so the user can steer the abrasive pad around the gasket surface. Replaceable abrasive pad works in seconds. Used for metal finishing, oxidation and coating removal, decorative finishes on different metals, deburring. 100% NON-WOVEN FLAP WHEELS • Alternating flaps of non-woven fiber and aluminum oxide coated abrasive arranged radially. • Less conformable than woven flap wheels. Used for metal finishing, oxidation and coating removal, decorative finishes on different metals, deburring and grain finishing. INTERLEAF FLAP WHEELS 3M CLEAN 'N STRIP DISCS For deburring, removing paint, rust or scale, conditioning metal, for cleaning pinchwelds, weatherstrip channels and drip moldings, for removing paint from "dings" and "chips". • Use on side for fast surface cleaning instead of wire brushes or sandpaper. • Tough, abrasive impregnated material resists gouging, conforms to contours. • 1/4" diameter mandrel shaft fits all 1/4" or 3/8" electric or air tool (for use under 6,000 r.p.m.). 2" overall mandrel length. • Material breaks down evenly providing consistent finishes. • Ideal for operations where critical tolerances may not be disturbed. • Mounted on 1/4” mandrel. • Used on straight die grinder. • Removes more stock. • Breaks down evenly providing consistent finishes. • Provides blending action while leaving final finish. • Mounted on 1/4” mandrel. • Used on small straight die grinder. • Reaches into corners and curves. • Interchanges with Roloc style. Easy blending of irregular shapes, corners and inside radius. SURFACE PREP DISCS WITH AN EDGE NOTE: Must Be Used With Special Disc Holder PART NUMBER DESCRIPTION QTY 907460 4" dia. disc* 3 *Discs and Mandrels sold separately. PART NUMBER GRIT SIZE MAX RPM 815400 60 Coarse 2 x 1 12,000 815401 120 Medium 2 x 1 12,000 815403 240 Extra Fine 2 x 1 12,000 815404 60 Coarse 2 x 2 12,000 815405 120 Medium 2 x 2 12,000 PART NUMBER GRIT SIZE MAX RPM 815406 180 Fine 2 x 2 12,000 815408 60 Coarse 3 x 2 7,500 815409 120 Medium 3 x 2 7,500 815410 180 Fine 3 x 2 7,500 PART NUMBER GRIT SIZE MAX RPM 815385 Extra Fine 2 x 1 12,000 815386 Fine 2 x 1 12,000 815387 Medium 2 x 1 12,000 PART NUMBER GRIT SIZE MAX RPM 815391 Medium 2 x 2 12,000 815395 Medium 3 x 2 7,500 815396 Coarse 3 x 2 7,500 PART NUMBER DIA. GRAIN GRADE COLOR MAX RPM QTY 811371 2 Aluminum oxide Coarse Brown 18,000 10 811372 2 Aluminum oxide Medium Maroon 18,000 10 811373 2 Aluminum oxide Very Fine Blue 18,000 10 811471 3 Aluminum oxide Coarse Brown 12,000 5 811472 3 Aluminum oxide Medium Maroon 12,000 5 811473 3 Aluminum oxide Very Fine Blue 12,000 5 Holders 2” 811357 3” 811360 Holders (have 1/4” shank) • Constructed of non-woven fiber with abrasive grain. • Waterproof - may be used with lubricants. • Resists loading and over-cutting. • Eliminates added finishing steps by hand. • Provides a consistent finish on both flat and irregular surfaces.
RkJQdWJsaXNoZXIy MzE1MDc=