PATRIOTWELDING RODS D13-3 REVISED MARCH, 2016 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. SOSMETAL PRODUCTS INC. TOOLS & SHOP SUPPLIES D11 D12 D13 D14 TOMAHAWK (Aluminum) Unique self lifting slag. Long shelf life. Excellent for joining dissimilar grades of aluminum. DIAMETER PART REC. LENGTH ELECTRODES/ (INCHES) NUMBER AMPERAGE (INCHES) POUND 3/32 818143 50/80 14 49 1/8 818144 70/120 14 33 5/32 818145 110/150 14 23 APPLICATIONS: For arc welding aluminums alloyed with copper, silicon, and magnesium. WELDING TECHNIQUES: Start by using the upper portion of the amperage range. Feed the electrode quickly and move fast maintaining a very close arc gap. WELDING POSITIONS: Flat, Horizontal RECOMMENDED CURRENT: DC reverse (+) TYPICAL MECHANICAL PROPERTIES: Undiluted Weld Metal Maximum Value Up To Tensile strength 34,000 psi (250 N/mm2) Yield strength 20,000 psi (150 N/mm2) Elongation 18% SNAKEYE (Cast Iron) Electrode for joining dirty - contaminated cast irons and cast irons to steel. No hazardous fumes. Crack resistant machinable welds. DIAMETER PART REC. LENGTH ELECTRODES/ (INCHES) NUMBER AMPERAGE (INCHES) POUND 3/32 818163 50/80 12 28 1/8 818164 70/110 14 15 APPLICATIONS: Universal electrodes for joining a wide variety of ductile, nodular and malleable cast irons. Ideally suited for the repair of meehanite dies. Extremely strong arc drive penetrates surface contaminants. Special slag composition can be welded over without creating porosity. WELDING TECHNIQUES: Remove any surface contamination with the proper solvents. Adjust the welding machine to the lowest proper setting that yields good welding conditions. WELDING POSITIONS: Flat, Vertical up, Horizontal, Overhead RECOMMENDED CURRENT: DC reverse (+) or AC TYPICAL MECHANICAL PROPERTIES: Undiluted Weld Metal Maximum Value Up To Tensile strength 70,000 psi (500 N/mm2) Yield strength 49,000 psi (350 N/mm2) Elongation 20% Hardness Rockwell B 88-90 Brinell 180 RESCUE (Stainless Steel) DIAMETER PART REC. LENGTH ELECTRODES/ (INCHES) NUMBER AMPERAGE (INCHES) POUND 3/32 818173 55/75 12 28 1/8 818174 75/110 14 13 5/32 818175 90/140 14 9 Excellent all position capabilities. Extra low carbon content to resist pitting. APPLICATIONS: For molybdenum bearing stainless steels with 1.5 to 3.0% Mo. Primarily used for resistance to pitting, many acids and general corrosion. Suitable for titanium and niobium stabilized versions of 316L stainless. WELDING TECHNIQUES: Material to be welded should be clean of all contaminants. Maintain a short arc and use stringer beads rather than a weave technique. WELDING POSITIONS: Flat, Vertical up, Horizontal, Overhead RECOMMENDED CURRENT: DC Reverse (+) or AC TYPICAL MECHANICAL PROPERTIES: Undiluted Weld Metal Maximum Value Up To Tensile strength 80,000 psi (550 N/mm2) Yield strength 56,000 psi (390 N/mm2) Elongation 42% Hardness Rockwell B 96 Brinell 209 PHOENIX (Tool Steel) Chromium carbide electrode for economical smooth overlays. Ripple free surface doubles “grip resistance”. Special formula totally eliminates porosity. DIAMETER PART REC. LENGTH ELECTRODES/ (INCHES) NUMBER AMPERAGE (INCHES) POUND 1/8 818184 110/140 14 9 5/32 818185 160/200 14 6 APPLICATIONS: For protecting most iron base surfaces against severe abrasive wear and moderate impact. WELDING TECHNIQUES: Use a stringer or wide weave technique. Deposit a maximum of 2 to 3 passes to achieve full hardness. WELDING POSITIONS: Flat, Horizontal (1/8” diameters can be used out of position) RECOMMENDED CURRENT: DC reverse (+) or AC TYPICAL MECHANICAL PROPERTIES: Undiluted Weld Metal Maximum Value Up To Hardness Rockwell C 58-60 Vickers 670-700 Wear Co-efficient 2%
RkJQdWJsaXNoZXIy MzE1MDc=