E10-17 REVISED OCTOBER, 2018 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. MULTILINK TERMINALS SOSMETAL PRODUCTS INC. ELECTRICAL FASTENERS E10 E11 E12 E13 E14 E15 Wire Range: 20-18 Size: .250 Blade Type: Female Disconnect 209391 Wire Range: 20-18 Size: .250 Tab Type: Male Disconnect 209390 Wire Range: 20-18 Type: Butt Connector 209375 Wire Range: 16-14 Size: 1/4” Type: Ring Tongue 209413 Wire Range: 16-14 Size: 10 Type: Ring Tongue 209412 Wire Range: 12-10 Size: 1/4” Type: Ring Tongue 209428 Wire Range: 12-10 Size: .250 Blade Type: Female Disconnect 209439 Wire Range: 20-18 Size: 8 Type: Ring Tongue 209379 Wire Range: 16-14 Size: .250 Blade Type: Female Disconnect 209423 Wire Range: 12-10 Size: 3/8” Type: Ring Tongue 209430 Wire Range: 20-18 Size: 10 Type: Ring Tongue 209380 Wire Range: 16-14 Size: 8 Type: Ring Tongue 209411 Wire Range: 12-10 Size: 10 Type: Ring Tongue 209427 Wire Range: 12-10 Size: .250 Tab Type: Male Disconnect 209438 Wire Range: 20-18 Size: 6 Type: Ring Tongue 209378 Wire Range: 16-14 Size: .250 Tab Type: Male Disconnect 209422 Wire Range: 16-14 Size: 6 Type: Ring Tongue 209410 Wire Range: 12-10 Size: 8 Type: Ring Tongue 209426 Wire Range: 12-10 Type: Butt Connector 209377 Wire Range: 16-14 Type: Butt Connector 209376 Wire Range: 20-18 Size: 1/4” Type: Ring Tongue 209381 MULTILINK TERMINAL ASSORTMENT 209400 MULTILINK TERMINAL ASSORTMENT • Includes ring, spade, butt and quick disconnects in wire sizes 20 through 10 AWG. BUTT CONNECTOR INSTALLATION RING, SPADE, SLIP-ON TERMINAL INSTALLATION 1. Strip the wire 3/8”. 2. Select a connector that matches the wire gauge and insert the wire into the connector barrel. 3. Make sure the wire is properly seated and crimp the connector using an insulated connector crimping tool nest that matches the color gauge of the connector. Do not crimp the solder sleeve. 4. Repeat steps 1 thru 3 for the other side. 5. Apply heat evenly around the length of the tubing (including the crimp area) from the center out to the ends until the tubing fully recovers and the adhesive flows. 6. Continue distributing the heat over the entire connector barrel until the solder flows into the opening. 7. Remove from the heat and let cool for the ULTIMATE connection. 1. Strip the wire 1/2”. 2. Select a connector that matches the wire gauge and insert the wire into the connector barrel. 3. Make sure the wire is properly seated and crimp the terminal barrel (the 1/4” of the barrel closet to the terminal end) using an insulated connector crimping tool nest that matches the color gauge of the connector. 4. Apply heat evenly around the length of the tubing (including the crimp area) until the tubing fully recovers and the adhesive flows. 5. Continue distributing the heat over the solder sleeve until the solder flows into the terminal barrel. 6. Remove from the heat and let cool for the ULTIMATE connection. 20-18 WIRE RANGE Color Code: RED Part No. 209378 209379 209380 209381 209382 209383 209384 209385 Size 6 8 10 1/4 5/16 3/8 6 8 Type Ring Ring Ring Ring Ring Ring Spade Spade Tongue Tongue Tongue Tongue Tongue Tongue Tongue Tongue MULTILINK TERMINALS MECHANICS ASSORTMENT Part No. 209400 136 pieces • 21 items • 12045 plastic tray Numbers in assortment 209375 209376 209377 209378 209379 209380 209381 209390 209391 209410 209411 209412 209413 209422 209423 209426 209427 209428 209430 209438 209439
RkJQdWJsaXNoZXIy MzE1MDc=