E10-22 REVISED OCTOBER, 2018 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. HEAT SHRINK CONNECTORS & TUBING ELECTRICAL FASTENERS SOSMETAL PRODUCTS INC. E15 E14 E13 E12 E11 E10 E-Z VIEW COLOR-CODED WINDOW BUTT CONNECTORS CLEAR-VIEW ADHESIVE-LINED HEAT SHRINK TUBING Your Problem Standard connectors do not allow the installer to see the wire which can result in the following problems: • Wire stripped too short, which can result in crimping the end of the wire. • Wire is not fully seated to connector, which can result in a poor termination. Our Solution E-Z View Color-Coded Window Butt Connectors: • Ensures the wire is crimped to connector • Ensures the center of crimp barrel is properly crimped • E-Z View waterproof insulation allows for indisputable inspection of the wire’s inpspection PART WIRE TUBING MINIMUM MAXIMUM NUMBER QTY GAUGE COLOR LENGTH EXPANDED I.D. RECOVERED I.D. 210163 10 22-18 Clear 6” 0.176” 0.045” 210164 10 16-14 Clear 6” 0.250” 0.080” 210165 10 12-10 Clear 6” 0.365” 0.100” • Color-coded stripes identify wire gauge size to be used with connector. • Color-coded stripes also indicate/guide the installer to the proper crimp position on the center. The Competitor’s Clear Heat Shrink Tubing Our CLEAR-VIEW Heat Shrink Tubing Specifications: Material: Cross-linked ionic polymer Shrink Ratio: Exceeds 2.5 to 1 Shrink/Recoveray Temperature: 90°C (194°F) Continuous Operating Temp: -55°C to 125°C (-67°F to 257°F) Flammability: Passed (FMVSS 302 test) Tensile Strength: 4,000 psi Longitudinal Change: + 1/-10% Max Dielectric Strength: 750 V/Mil (30KV/MM) Vs. Both assortments contain E-Z VIEW Butt Connectors and CLEAR-VIEW Heat Shrink Tubing • Wire-stop in butt connectors prevents over-insertion of wire. • Window in center of connector assures that wire is seated properly and that the wire is being crimped to the connector. PART COLOR-CODED WIRE NUMBER QTY STRIPES GAUGE 210160 100 Red 22-18 210161 100 Blue 16-14 210162 100 Yellow 12-10 What’s special about this heat shrink tubing? • Constructed of a cross-linked ionic polymer material for superior strength. • Lightweight material is easy to work with and can be cut using simple shears or scissors. Lined with a hot-melt adhesive to provide a completely waterproof seal • Wire AWG is printed on the side for easy size ID. Absolutely clear tubing provides ultimate clarity for visual inspection at any time. • Exceeds 2.5-to-1 shrink ratio, to contain connectors up to 2 and a half times larger than your cable Part No. 501768 78 pieces • 6 items 12051 steel tray Numbers in assortment 210160 210161 210162 210163 210164 210165 Part No. 201169 54 pieces • 6 items 12047 plastic tray Numbers in assortment 210160 210161 210162 210163 210164 210165
RkJQdWJsaXNoZXIy MzE1MDc=