CONNECTORS / TAPE E12-9 REVISED OCTOBER, 2018 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. SOSMETAL PRODUCTS INC. ELECTRICAL FASTENERS E10 E11 E12 E13 E14 E15 • Optimum seal. • Unique design. • Vibration proof protection. • Internationally approved: UL #E79903, CSA #LR50370-10, VDE #57986, SEV #100989. Protection up to 70 PSI. • Working temperature: -22°F (-30°C) to 212°F (80°C) for short periods of time. • Seal: IP68 comparable to NEMA. 6 classification. Dust protection. • Resistant to: salt water, weak acids, weak alkalis, alcohol, ester, ketones, ether, benzine, gas, mineral oil, animal and vegetable oils, gasoline, oil, grease, and common solvents. MOUNTING MAXIMUM PART DIAMETER HOLE OVERALL SIZE NUMBER RANGE CLEARANCE LENGTH (INCHES) QTY STANDARD TYPE 210891 .157 - .314 .561 1.692 3/8 2 210892 .236 - .472 .825 1.734 1/2 2 210893 .511 - .708 1.050 1.969 3/4 1 210894 .709 - 1.024 1.303 2.283 1 1 FLEX TYPE 210895 .157 - .314 .561 3.282 3/8 2 210896 .236 - .472 .825 4.135 1/2 1 210897 .511 - .708 1.050 5.333 3/4 1 Standard Type The standard type is used primarily for stationary equipment, appliances and machinery. The flex type provides extended support for tools, moving machinery and similar equipment. NYLON LIQUID TIGHT STRAIN RELIEF CORD CONNECTORS Flex Type For Telephone, Intercom, Computer Link and Communications Systems. Part No. 210492 (50) “UR” Style (RED) 2 or 3 wire Butt Connector Handles 19 – 26 AWG solid copper wire. Use to cut into service in readyaccess cases, pedestal mounts and for pigtail joints on cable splices. Three-port construction makes them a perfect connector for general splicing and tapping. Maximum insulation size, O.D. of .066”. Part No. 210493 (50) “UY” Style (YELLOW) 2 wire Butt Connector Accepts two 22 – 26 AWG solid copper conductor wires. UY connectors are small and compact, with two ports designed for straight splicing. Maximum insulation size, O.D. of .060”. • No stripping of insulation. • Insert wires and press with pliers. Installation complete. • Moisture and corrosion proof. • For solid 19-26 AWG Copper Wire. 3M SCOTCHLOK COMMUNICATIONS CONNECTORS PART NO. DESCRIPTION QTY 210490 Without Sealant 12 210491 With Sealant 12 • Insert 2 or 3 unstripped wires completely into the connector. • Hold a crimping tool perpendicular to the wires and make the connection by driving the cap down. • UL & CSA listed for use to 600V maximum. • Available with or without non-corrosive sealant for moisture protection. Self-stripping connectors for making 2 or 3 wire pigtail connections with a wire range of 22 – 14 gauge. SELF-STRIPPING ELECTRICAL PIGTAIL CONNECTORS Self-bonding — Fuses into a solid insulation within 24 hrs of application. • Waterproof seal insulates against corrosion, shock and vibration. • Conforms to any size to protect, insulate or mask. • No adhesives, self-vulcanizing; fuses to itself. • No heat needed; inseparable after 24 hrs. at room temperature. • Paper liner separates layers in roll. Part No. 812204 1" x .020" x 36' roll Color: Red Specially formulated compound that seals, insulates, weatherproofs and protects any surface. • Replaces heat shrink tubing. • No heat guns or open flames needed. • Retains seal in temperature ranging from - 50°F to + 300°F. • Unaffected by salt spray and common automotive fluids. PART DIMENSION NUMBER 3M NUMBER 3/4 x 15ft 812210 2242 1-1/2 x 15ft 812211 2242 Operating temperature: -50°F to +392°F continuous, - 85°F to + 500°F intermittent. Dielectric strength: 400 volts. STRETCH AND SEAL self-fusing silicone tape protects critical connections. Part No. 812218 1 roll • 2-1/2" x 10ft. • Seals tightly from -30° below zero to +150°F. • Tough vinyl backing stops sagging on vertical applications. • Unaffected by UV rays, sunlight, water, salt, oil, grease, or battery acid. (ASTM D-543) • Self adhesive, sticks to any surface. • Paintable. • Dielectric strength exceeds 16KV (ASTM D-10000). • Will not shrink or crack, stays permanently flexible. LINERLESS SPLICING TAPE SELF-FUSING SILICONE TAPE E-Z SEAL DIELECTRIC COMPOUND TAPE 2. 3. 1. CUT PEEL POSITION 4. SEAL
RkJQdWJsaXNoZXIy MzE1MDc=