HEAT SHRINK TUBING E12-12 REVISED OCTOBER, 2018 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. ELECTRICAL FASTENERS SOSMETAL PRODUCTS INC. E15 E14 E13 E12 E11 E10 MOISTURE PROOFING MULTI-WIRE CONNECTORS Protect your multiple wire connections from corrosion, contaminants & current leakage with our new assortment. SPECIFICATIONS HIGH ADHESIVE UL – MIL Spec – CSA – Continuous Operating Temp. -55°C to 110°C Minimum Shrink Temp. 121°C Tensile Strength 2450 psi Heat Shock – Elongation 475% Low Temperature Flexibility 4 hrs. @ -30°C Longitudinal Change <10% Secant Modules (2%) 16,500 psi Flame Retarded No Dielectric Strength 500 Volts/MIL Volume Resistivity 1014 OHM/CM Corrosion Resistance Non-Corrosive Fungus Resistance Non-Nutrient Fluid Resistance Good MULTIPLE WIRE HIGH ADHESIVE - HEAT SHRINK TUBING • 4 to 1 heat shrink ratio. • Polyolefin tubing. NOTE: DURING THE HEAT SHRINK PROCESS SEPARATE THE WIRES TO ALLOW THE ADHESIVE TO FLOW IN BETWEEN. Clear tubing for visual inspection. Color coded by diameter. High-flow adhesive can seal between multiple wires. Adhesive-lined heat shrink tubing provides the best protection for electrical terminations for primary wire and battery cables that are subjected to extreme conditions. Provides an adhesive barrier which protects electrical components from calcium chlorides, sodium chlorides, magnesium chlorides, abrasion, vibration, and other environmental contaminants. • Chrysler specs MS-DB56 CAN 3686. • Ford specs ESB-M97D56A1. • Specially designed for sealing multiple wires. • Provides superior strain relief. PRE- SHRINK REC PART I.D. I.D. WIRE COLOR/ NO. (INCHES) (INCHES) RANGE COLOR DASH LENGTH QTY 812987 0.220 0.045 24-12 AWG 6 2 812988 0.300 0.060 22-10 AWG 6 2 812989 0.350 0.080 16-8 AWG 6 2 812990 0.450 0.105 14-4 AWG 6 2 812991 0.700 0.175 8-2/0 AWG 6 2 • This assortment contains In-Line Butt Connectors (cat. pg. E12-4A), Closed -End Connectors (cat. Pg. E12-4B) and Multiple Wire High Adhesive Heat Shrink Tubing (cat. Pg. E12-8A). All three products are for use in multiple wire situations. • Multi-wire heat shrink tubing is different than the regular heat shrink tubing. This has a high-flow sealant that allows it to get in the spaces between the multiple wires an completely seal the connection. Regular tubing will only seal the outer perimeter of multiple wires, allowing moisture and other contaminants to work their way into the connection through the small spaces between the wires. • Includes torch with butane for a handy heat source. Puncture Resistant & Clear Heat Shrink Tubing Part No. 501750 85 pieces • 11 items 12051 steel tray Numbers in assortment 210600 210601 210602 210603 210675 210676 412227 812988 812989 812990 812991
RkJQdWJsaXNoZXIy MzE1MDc=