WIRE COVERINGS & FITTINGS E12-24 REVISED SEPTEMBER, 2022 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. ELECTRICAL FASTENERS SOSMETAL PRODUCTS INC. E15 E14 E13 E12 E11 E10 SIZE PART TYPICAL TYPICAL STANDARD IN. NUMBER O.D. I.D. PACK FT. 3/8 210610 0.70 0.49 50 1/2 210611 0.83 0.63 50 3/4 210612 1.04 0.83 50 1 210613 1.30 1.05 50 PART NUMBER CONNECTOR SIZE STRAIGHT-IN RIGHT ANGLE THREAD IN. TYPE TYPE SIZE 3/8 210620 210624 1/2 NPT 1/2 210621 210625 1/2 NPT 3/4 210622 210626 3/4 NPT 1 210623 210627 1 NPT – SNAP-IN FITTINGS – SIZE STRAIGHT MOUNTING IN. SNAP IN HOLE DIA. 1/4 210648 0.500 3/8 210649 0.875 1/2 210650 0.875 3/4 210651 1.093 1 210652 1.375 SIZE PART TYPICAL TYPICAL STANDARD IN. NUMBER O.D. I.D. PACK FT. 1/4 210630 0.57 0.40 50 3/8 210631 0.70 0.49 50 1/2 210632 0.83 0.63 50 3/4 210633 1.04 0.83 50 1 210634 1.30 1.05 50 • Nylon construction is suitable for indoor and outdoor use. • The conduit can be pushed into the fitting and the sealing nut is tightened, the tubing does not have to be threaded onto the nut. • The connector is supplied with an O-ring and steel locking nut. • For larger tubing sizes, standard metallic trade fittings can be used. Gray color. • Liquid tight conduit is non-metallic, gray PVC construction, and meets UL Type B. • The smooth inner surface allows for quick feeding of wires with no sharp edges to damage conductors. • Lightweight and resistant to crushing, easily cut to length with a knife. • Suitable for either indoor or outdoor use. • Use with fittings at right for a liquid-tight connection. • UL rated for 80° C dry, 60° C wet, 70° C oil resistant. CSA rating for -18° C to 75° C. LIQUID TIGHT ELECTRICAL CONDUIT and FITTINGS • Nylon construction is suitable for indoor and outdoor use. • Both threaded-in, straight-in and right angle, and snap-in straight-in type only. Fittings can only be used with flexible electrical tubing, shown at left. • The fitting does not have to be disassembled for use, simply push tubing in and tighten the lock nut and snap or screw into place. • For larger tubing sizes, standard metallic trade fittings can be used. • Highly flexible black PVC tubing for a non-metallic covering over wires, or fiber optic cables. • Available from 1/4” to 1” I.D. • Resistant to oil, water and corrosion, excellent in high vibration areas or where flexing occurs. • Cut to length with a knife. • UL recognized under the component program. • CSA certified for 3/8” and larger sizes. CONDUIT FITTINGS TUBING FITTINGS SNAP-IN FITTING RIGHT ANGLE FITTING STRAIGHT-IN FITTING STRAIGHT-IN FITTING RIGHT ANGLE FITTING FLEXIBLE ELECTRICAL TUBING and FITTINGS – THREADED FITTINGS – SIZE STRAIGHT-IN RIGHT ANGLE THREAD IN. TYPE TYPE SIZE 3/8 210640 210644 1/2 NPT 1/2 210641 210645 1/2 NPT 3/4 210642 210646 3/4 NPT 1 210643 210647 1 NPT Use With Liquid Tight Conduit Only Extra Flexible!
RkJQdWJsaXNoZXIy MzE1MDc=