ENGINE SERVICE TOOLS G16-12 REVISED JANUARY, 2013 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. VEHICLE MAINTENANCE SOSMETAL PRODUCTS INC. G18 G17 G16 G15 G14 G13 G12 G11 G10 COOLANT TEST STRIPS l Removes radiator caps quickly. l Perfect for closed system caps in tight areas. l Engage pliers over cap, press down and turn. Part No. 113540 l Direct reading style in "Fahrenheit and Celsius". l Temperature compensating. l Tests ethylene gycol type solutions. Part No. 113123 ANTI-FREEZE/COOLANT TESTER l 6 floating disc-5 show degree of protection: 6th disc shows not safe (too much anti-freeze)*. l Break resistant SAN Plastic Tube. l Easy to read-Convex tube magnifies discs when solution is drawn into tube. l Gradings in celsius and fahrenheit. Part No. 113122 Tests permanent anti-freeze, hot or cold-accurate at any temperature from +200°F. to -°F, discs are perfectly compensating. ANTI-FREEZE TESTER RADIATOR CAP PLIERS Tests freezepoint/boilpoint and coolant ph levels protection in just 15 seconds. Part No. 113102 50 l Determines protection against freeze-up and boil-over, which can cause leaks and damage to the water pump, head gasket and other cooling system components. l Quickly tests both ethylene and propylene glycol - based coolants, in just a matter of seconds. Hydrometers do not accurately test propylene glycol. l Identifies cooling system service opportunities. l Prevents costly repairs in fleet maintenance. l Assists in coolant recycling. Tests for proper protection levels before and after recycling. Tests quality when purchasing recycled coolant. l Not recommended for use with red or orange dyed coolants. l Satisfactory range is 7.5 to 10. DYNA-CUTTER l Cuts rubber or plastic hose in seconds. l Cuts hose up to 1-1/8" diameter. l Excellent for heater hose, fuel line, PCV hose. HOSE CLAMP PLIERS l Removes wire type hose clamps. l Special slots will not slip off clamp. l Works at a 90° angle or straight. Part No. 113420 Replacement blades available, 2 per pack. Order Part No. 113149 2 Part No. 113148 Pops the seal every time...FAST and EASY Simply insert the tip of the tool behind the oil or grease seal, press and pull. Leverage works for you. No more pounding, hammering and digging that might damage bearings. The right tool for the job. Two size tips reach in and fit nearly all seal applications. Part No. 213283 SEAL PULLER Part No. 113115 70 l Fast & accurate results with either conventional or long life coolants. l Regular testing of anti-freeze coolant minimizes downtime & it’s associated cost. l Measures the freeze-point, reserve alkalinity & PH when used with long life/extended life coolants such as Dexcool®. l Color chart shown on bottle. l 70 strips per bottle.
RkJQdWJsaXNoZXIy MzE1MDc=