REMA TIRE REPAIR & TIRE REPAIR TOOLS © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. H11-5 REVISED APRIL, 2020 SOSMETAL PRODUCTS INC. VEHICLE MAINTENANCE H10 H11 H13 H14 H15 H17 H18 H19 REMA’S UNIVERSAL PATCH The only patch you’ll ever need for making a nail hole repair. The universal patch applies non-directional, center-over-injury, on any type of tire - passenger or truck, radial or bias, tube or tubeless. PART REMA PER SIZE NUMBER NO. BOX (INCHES) 715405 UP 6 20 43mm x 43mm REMA STITCHER • Corrugated stitching tool for securing patches to tube and tires. • REMA No. 30 • Rubber to rubber vulcanization. • Use on: patches for tubes, tubeless tires, small radial repairs. • 8 oz. brush top can. • CFC Free for improved performance. • REMA No. 203F •Inside the tire bonding where cords are exposed. •Use on: all radial repair patches. •8 oz. brush top can. •CFC Free for improved performance. •REMA No. BL-8F • Use to remove silicones, talcs, etc. before buffing. • Cleaning aid only, not a substitute for mechanical buffing. • 16 oz. spray can. • CFC Free for improved performance. • REMA No. 70F • Seals minor leaks bead of tire & wheel rim. • 1 quart brush top can. • CFC Free for improved performance. • REMA No. 960F Part No. 715413 Part No. 715418 Part No. 715417 Part No. 715416 Part No. 715415 RASPS Hole injury must be clean and roughened before inserting repair units. Rema quality. • For non-steel belted tires. • Rema No. 199 Part No. 715425 • 1/4’’ Rasp for all passenger radial tires. • Rema No. 6003 Part No. 715426 • Used with a tire buffer to prepare the surface of the inside of a tire before applying a repair patch. • 2-1/2” dia., 5/8”, 3/8” arbor hole. • 25,000 RPM max. • 36 grit. CUP RASP • Multiple uses: works on rubber, leather, wood, plastic & similar materials. • Because of its round tooth design it can saw any radius or profile. • Corrugated style with screw tip. • 1/4” diameter, 9” blade length. Part No. 715157 PROFESSIONAL HEAVY DUTY TRUCK TIRE RASP This all purpose tool is used for truck tire repair. Also preferred by electricians, plumbers, carpenters and other craftsman. • New optimized design for today’s tires. • Improved construction & performance. • Bonding layer with 50% improvement of chemical vulcanization. • Reduced influence of imbalance at high speed. • Reduces prep time & consumption of chemical supplies. RUBBERHOG® WHEELS Part No. 715439 Part No. 715581 • Features SSG coatings which provide a uniform surface texture for maximum adhesion. • Flared contour wheels are designed so that the technician can prep a large area of the tool in contact with the tire, resulting in a more even buffed surface. • 2-1/2”, 63.1mm dia., 1-1/16”, 26.9mm width, 3/8”, 9.5mm bore. • Coating: 170 - fine. • 5,000 RPM max. BUFFING WHEEL • Sherbo tungsten carbide buffing wheels have an air-cooled design which permits faster, cooler and cleaner buffing and helps eliminate the burning of rubber. • No. 60 HB Nickel Chromium buffing wheel designed to outlast copper colored wheels. • For texturizing of tubes and innerliners. • 2-1/2”, 65mm dia., 3/8”, 10mm arbor hole. • 5,000 RPM max. Part No. 715580 REMA COLD VULCANIZING FLUID REMA SPECIAL CEMENT REMA LIQUID RUBBER BUFFER REMA RIM & BEAD SEALER
RkJQdWJsaXNoZXIy MzE1MDc=