VEHICLE MAINTENANCE SOSMETAL PRODUCTS INC. NUTS J10-76 REVISED OCTOBER, 2018 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. NUTS J10 RIVET-NUT BLIND THREADED RIVETS l Perfect for use in light-gauge materials of metal, plastic and rigid composition. Material previously too thin to tap threads can now be accommodated. l A Rivet-Nut is a tubular rivet with internal threads. It can be installed from one side in seconds. Once a Rivet-Nut is installed, it is ready to use with clean threads available for screw attachments. Used for materials .010 through .125 in. thickness. l The Rivet-Nut Insta-Threads are available in standard heads, which are surface mounted and extend slightly above the material in which they are installed. Also available are the expander heads (small flathead), which may be used for flush or 120° countersunk installations or wherever a smaller head may be required. PROPER TOOL SELECTION l Both Rivet-Nut tool, H.D. Clinch-Nuts and light duty installation tools will install all threaded inserts, Clinch-Nuts or Rivet-Nuts. However, due to the design of each type of threaded insert, we recommend that the Clinch-Nut tool or light duty tool be used for Clinch-Nut installation and that the Rivet-Nut tool be used for Rivet-Nut Insta-Thread installations. TOOL WARRANTY NOTE: Rivet Setting Tool, Part No. 503910, is not warranted by us. The manufacturer requires that tools be returned to them. Necessary information is packed with every tool. RIVET-NUT TOOL 1.Thread mandrel into Rivet-Nut. Part No. 503910 Includes a mandrel and a nosepieces for 8-32, 10-24 and 10-32 inserts. 2.Place in pre-drilled hole. 3.Clinch handles. THREAD STEEL ALUM STEEL ALUM DRILL GRIP H.D. LIGHT DUTY SIZE PART PART PART PART SIZE RANGE CLINCH-NUT INSTALLATION (PITCH) NUMBER NUMBER NUMBER NUMBER TOOL TOOL ADAPTER 6-32 503914 503930 503921 503937 3/16 503150 --- 8-32 503915 503931 503922 503938 7/32 .010” min. 503151 503176 10-24 503916 503932 503923 503939 1/4 to 503152 503177 10-32 503917 503933 503924 503940 1/4 .080” max. 503153 503178 1/4-20 503918 503934 503925 503941 11/32 503154 503179 5/16-18 --- 503935 --- 503942 27/64 .020” min. 503155 503180 to 3/8-16 --- 503936 --- 503943 1/2 .125” max. --- --- M3.5-0.6 --- 504366* --- 504372* M4.9(3/16) n/a n/a M4-0.7 --- 504367* --- 504373* M5.6(7/32) M.25 min. n/a n/a M5-0.8 --- 504368* --- 504374* M6.4(1/4) to n/a n/a M6-1.0 --- --- --- 504375* M8.7(11/32) M2.03 max. n/a n/a M8-1.25 --- 504370* --- 504376* M10.5(27/64) M.50 min. n/a n/a to M10-1.5 --- 504371* --- 504377* M12.5(1/2) M3.18 max. n/a n/a *Discontinued when stock is depleted. STANDARD HEAD EXPANDER LARGE FLANGE SMALL FLANGE MANDRELS AND NOSEPIECES FOR RIVET NUT TOOL #503910 *Mandrel only, nosepiece not required. THREAD PART SIZE NUMBER 6-32 503980 8-32 503981 10-24 503982 10-32 503983 THREAD PART SIZE NUMBER 1/4-20 503984* 4mm 503985 5mm 503986 6mm 503987* Cutaway illustration of Rivet-Nut Insta-Threads Expander head Standard head
RkJQdWJsaXNoZXIy MzE1MDc=