GRADE 2 CAP SCREWS A10-10 REVISED OCTOBER, 2012 © Copyright 2023. All rights reserved. No portion may be copied or reproduced in any manner. FASTENERS & HARDWARE SOSMETAL PRODUCTS INC. A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 l USS (Coarse threads.) l Low carbon steel. Used in light duty, low stress applications. l Low carbon steel - not heat treated. l Available in coarse (USS) thread only. l The “Shear Bolt” has special low strength properties that allow it to break or bend before expensive equipment is damaged. HEX HEAD CAP SCREWS, NUTS AND WASHERS FLAT HEAD SLOTTED CAP SCREWS * NOTE: 502934 and 502941 - 40 LENGTH 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1/2 USS 502901 3/4 USS 502902 502910 1 USS 502903 502911 502920 502929 1-1/2 USS 502904 502912 509921 502930 502938 502948 502957 2 USS 502905 502913 502922 502931 502939 502949 502958 2-1/2 USS 502906 502914 502923 502932 502940 502950 502959 3 USS 502907 502915 502924 502933 502941* 502951 502960 3-1/2 USS 502908 502916 502925 502934* 502942 502952 502961 4 USS 502909 502917 502926 502935 502943 502953 502962 4-1/2 USS 502918 502927 502936 502944 502954 502963 5 USS 502919 502928 502937 502945 502955 502964 5-1/2 USS 502946 6 USS 502947 502956 502965 USS 51205 51207 51209 51211 51213 51217 51219 QTY 200 200 200 100 100 100 50 ALL 50815 50816 50817 50818 50819 50821 50822 QTY 500 250 250 250 100 100 50 USS 50906 50907 50908 50909 50910 50912 50913 SAE 50924 50925 50926 50927 50928 50930 50931 QTY 500 250 250 250 100 100 50 USS 20 18 16 14 13 11 10 200 DIAMETER CAP SCREWS HEX NUTS LOCK WASHERS FLAT WASHERS THREADS PER INCH 100 50 30 25 l Contains the most popular sizes. l Exceeds Grade 8 specifications. l Includes 4 sizes of high collar lock washers. l Sizes from 1/4” x 1/2” to 1/2” x 1-3/4”. l USS - Coarse thread. l 501066, as well as 501318 and 501319 shown below comes in a sturdy steel tray which fits into both the 12007 and 12019 slide racks, part of our complete line of storage cabinets. SOCKET HEAD CAP SCREW ASSORTMENTS — OTHER SOCKET HEAD CAP SCREW ASSORTMENTS AVAILABLE — S . 6 .-1--x6 . 6 .0AND LOCKWASHERS 501066 Contents in this assortment can be found in catalog section A10 - CAP SCREWS. 3/8” x 3/4” Part No. 503428 5/16” x 3/4” Part No. 503421 5/16” x 1” Part No. 503422 5/16” x 1-1/4” Part No. 503423 5/16” x 1-/2” Part No. 503424 5/16” Hi-Collar Part No. 504264 3/8” x 1” Part No. 503430 3/8” x 1-1/4” Part No. 503431 3/8” x 1-1/2” Part No. 503432 3/8” Hi-Collar Part No. 504265 1/2” x 1” Part No. 503448 1/2” x 1-1/4” Part No. 503450 1/2” x 1-1/2” Part No. 503451 1/2” x 1-3/4” Part No. 503452 1/2” Hi-Collar Part No. 504267 1/4” x 1/2” Part No. 503409 1/4” x 3/4” Part No. 503411 1/4” x 1” Part No. 503413 1/4” x 1-1/2” Part No. 503415 1/4” Hi-Collar Part No. 504263 Protected by BLACK OXIDE FINISHTM against rust & corrosion Protected by LUSTERPLATETM against rust & corrosion Assortment Photo for illustration purposes only. Actual Contents may vary. Protected by BLACK OXIDE FINISH™ against rust & corrosion Includes lock washers. Part No. 501066 344 pieces • 20 items 12017 steel tray Numbers in assortment 503409 503411 503413 503415 503421 503422 503423 503424 503428 503430 503431 503432 503448 503450 503451 503452 504263 504264 504265 504267 Manufactured from alloy steel, heat treated, with a Class 3A fully formed thread. MASTER ASSORTMENT USS(COARSE) & SAE (FINE) Part No. 501319 465 pieces • 31 items • 12062 steel tray Numbers in assortment 503398 503399 503401 503402 503404 503405 503406 503407 503408 503501 503502 503503 503504 503955 503956 503957 503958 503959 503960 503961 503962 503963 503964 503965 503966 503967 503968 503969 503970 503971 503972 Sizes: No. 10-24 x 1/2” through 3/8” x 2” Includes hex key wrenches. USS(COARSE) & SAE (FINE) Part No. 501318 144 pieces • 18 items • 12056 steel tray Numbers in assortment 113831 113832 113834 113835 503405 503407 503409 503411 503413 503416 503421 503422 503423 503428 503430 503431 503432 503434 Sizes: No. 1/4” x 1/2” through 3/8” x 1-1/2” USS(COARSE) Part No. 503007 120 pieces • 12 items • 12038 plastic tray Numbers in assortment 503409 503411 503413 503415 503420 503421 503422 503424 503428 503430 503431 503432 LENGTH PART PART PART NUMBERQTY NUMBERQTY NUMBERQTY 1 504475 10 --- - --- - 1-1/4 504476 10 504483 10 --- - 1-1/2 504477 10 504484 10 504492 5 1-3/4 504478 10 504485 10 504493 5 2 504479 10 504486 5 504494 5 2-1/4 504480 10 504487 5 504495 5 2-1/2 504481 10 504488 5 504496 5 3 504482 10 504489 5 504497 5 3-1/2 --- - 504490 5 504498 5 4 --- - 504491 5 504499 5 DIA. DIA. DIA. 1/2-13 5/8-11 3/4-10 QTY
RkJQdWJsaXNoZXIy MzE1MDc=